ikar hra12 fall arrestor with rescue/recovery mechanism

Description Component description IKAR HRA12 Fall arrest block / inertia reel / retractable type fall arrester, with built in two-way rescue/ recovery mechanism This Controlled descent fall arrest Block carries a Declaration of Conformity to EN360 Aluminium housing, with a galvanised steel cable lifeline With release pin and two-way winding handle, to engage rescue/recovery mode Fixed handle anchor attachment point Attachment/connection handle or can be fitted to a davit or tripod via a bracket Aluminium double action hook on end of lifeline to EN362 The Ikar HRA Fall arrest device with rescue lifting and lowering facility, equipped with a recovery mechanism operated by a device mounted handle.  After an arrested fall, or if the user becomes incapacitated at the bottom of a shaft, the recovery mechanism can easily be engaged by a second person to raise or lower the person to a place of safety. A self-retracting fall arrest block that comes with an integral rescue recovery winch facility is most commonly used for confined space applications. It enables the rescuer to raise or lower the casualty in an emergency. Working in a similar way to a car safety belt, during normal use the user moves freely whilst the galvanised steel cable lifeline is kept under permanent tension. In the event of a fall the locking system will activate and the internal brake disk will absorb energy to well below the 6kN limit required by the DIN EN 360 standard. In the case of a rescue, the rescue/recovery function is quickly activated by snapping the side handle into place. The cable drum is permanently locked to the handle shaft and by rotating the handle the casualty can be either lifted or lowered to a place of safety. The rescue/recovery function can be activated whether the cable is on free run or from the locked position after an arrested fall. The HRA can be anchored directly to a suitable anchorage point via the attachment handle or alternatively can be mounted on a rescue tripod. The IKAR HRA Fall Arrest Device is not suitable for use over a leading edge and has not been edge tested. Inspection, Servicing and Repairing your Fall Arrestor In our opinion, Ikar Fall Arrestors are manufactured to a higher quality standard and are more durable than any other comparable product. They should be inspected annually and when maintained they provide fall protection safety for their full working life. To ensure that you receive the full benefit of your investment ee offer a full inspection, service and repair package by the manufacturer in the UK. IKAR Fall Arrest Devices purchased from SafetyRespect UK Ltd. are supplied with a Karabiner, Declaration of Conformity, User Record Card and User Instructions. We are here to help Please contact us if you would like to discuss the suitability of this safety component for the application you want to use it for.