Portable Patient Monitor 12.1 Inch Color with 6 Standard Parameter

Portable Patient Monitor 12.1 Inch Color with 6 Standard Parameters: Features:    Ergonomic design, portable, convenient for use 12.1″ TFT display, configurable up to 8 waveforms, enables maximum data visibility for the most critical parameters Unique digital SPO2 technology can work accurate during motion and low perfusion Anti-AC &　high-frequency electrosurgical ＆　defibrillator interference Rich screen layout, standard, large font, trend graph, OxyCRG, ECG full lead, and others Strong data storage: 720 hours trends, 10000 group NIBP, 1024 alarms events ST analysis, arrhythmia analysis, pacemaker analysis, drug analysis, and calculation Audible & visual alarm available, adjustable Patient information management function Powerful software function to support use in NICU, ICU, OR, CCU or normal patient room Optional software upgrading based on USB Wired/wireless networking with central monitoring system, up to 64 beds in one group Built-in 3 trace thermal recorder for printing real-time and historical data Multi-language i.e. English, Spanish, Turkish. Super long life rechargeable Lithium battery up to 4 hours of working time Suitable for adult, pediatrics, and neonate patients Standard configuration: ECG, NIBP, SPO2, TEMP, RESP, PR, Rechargeable Lithium battery Optional: Dual TEMP Dual IBP ETCO2 (side stream) Thermal recorder Wall mount Trolley ECG Full lead: I, II, III, AVL, AVR, AVF and V Gain: 5mm/mV, 10mm/mV, 15mm/mV, 20mm/mV and 25mm/mV Scanning speed: Changeable with three grades of 12.5mm/s, 25mm/s and 50mm/s Band width: 0.05Hz-100Hz(3dB) Heart rate: Scope: 15 times/minute to 300 times/minutes Accuracy:  ±1 time/minute Variation of heartbeat LORENZO drawing: Analysis on heartbeat data for the current 5 minutes with histogram during RR period. Arrhythmia: Twenty kinds of common abnormal ECG can be analyzed, with ECG data of 1000 times of arrhythmia kept and with 10 seconds kept for each time. Accuracy: Error rate < 20% Undetected rate < 20% ST section Scope:     ±0.8mV Precision:  ＜ ±0.05mV SpO2 Detection scope:   0%-100% Accuracy                 ±1%     90%-100% ±2%      70%-89% NIBP  Theory Electric oscillator Cuff gassing time   less than 15 seconds First-time gassing pressure: dynamic state 24kPa（180 mmHg） Manual selection: 9.3kPa（70 mmHg），13.3kPa（100 mmHg），16.0kPa（120 mmHg） 18.6kPa（140 mmHg），20.0kPa（150 mmHg），21.3kPa（160 mmHg）， Automatic detection period: 1 minute to 240 minutes Stop size：1 min（1 min -10min）, 5min(10 min -30min), 10min(30 m in -90min) and 30min（90 min -240min） Detection scope: Systolic blood pressure:   4kPa -34kPa(30mmHg -255mmHg) Diastolic pressure             2kPa -29.3kPa(15mmHg -220mmHg) Mean pressure               2.7kPa～31.3kPa       （20mmHg～235mmHg） Detection accuracy Static pressure: ±3mmHg Pulse rate:  ±2% Resp Chest impedance method or concentration of carbon dioxide at end of respiration Scope of chest impedance method     0 time/minute – 100 minutes/minute The precision of chest impedance method  time/minute Detection scope of carbon-oxygen at end of respiration 3mmHg-75mmHg； 0.4%vol-9.9%vol Detection scope of respiration rate: 2 times/minute ->60 times/minute（including baby） Detection precision of respiration rate: ±1 time/minute Temp Single/double path Type:    Vascular/surface temperature Scope:    20℃～50℃ Accuracy:  ±0.2℃ Invasive blood pressure (optional) Single/double path Type: direct and continuous detection Scope: -6.67kPa(-50mmHg)—46.67kPa(350mmHg) Precision: below 13.33kPa(100mmHg) ±0.27kPa(2mmHg)  13.33k Pa(100mmHg) above ±2% Frequency response：DC-12Hz Input resistance: not less than 500kΩ Sensitivity of sensor: 5μV/V/mmHg Motivation voltage：5V (DC) Accuracy of sensor: ±2％Isolation voltage: 4 kV